hoi dianneWoollie
1 Like
3 Likes
Dash cams can be installed one of two ways
1- fit the dash cam to the windscreen where it gives an unobtrusive view of the road ahead and not to obstruct the drivers vision, touch the cable behind the headlining at the top of the windscreen ( there is a gap on most cars) , run the cable down the screen pillar ticking the cable behind the rubber seal , then find the best route to the cigarette/power socket and plug in, the camera will work as soon as you start the car
2- it can be wired directly to the car’s fuse box, this usually, and is recommended to fit a parking mode device ( some are built into the cable)
two fuses are needed to tap into , one gives a permanent feed to the camera ( for parking mode) the other is for when the car is being driven, the parking device will cut off at a certain voltage so as not to drain the car’s battery,
1 Like